Parametric Design – Medlin Drone

FPV Tilt Gimbal – DarwinFPV Darwin240 – LDX-218

This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6623575

FPV Tilt Gimbal – Rotor Riot Skyliner MK3 – LDX-218

This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6622652

FPV Tilt Gimbal – Rotor Riot CL2 – LDX-218

This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6622653

FPV Tilt Gimbal – AxisFlying Manta 6 – LDX-218

This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6586648

FPV Tilt Gimbal – Armattan Badger – LDX-218

This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6586646

FPV Tilt Gimbal – SpeedyBee Mario Fold 8 – LDX-218

This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6586640

FPV Tilt Gimbal – SpeedyBee Master 5 HD – LDX-218

This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6384615

FPV Tilt Gimbal – GEPRC MOZ7 – LDX-218

This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6338304

FPV Tilt Gimbal – Lumenier QAV-RXL 2 – LDX-218

This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6269244

FPV Tilt Gimbal – iFlight BOB57 – LDX-218

This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6262832 Design commissioned by: Daniel Ausweger