This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:5820622 Design commissioned by: FPVframe.ch
Category Archives: Gimbal Design
FPV Gimbal – Geprc Mark 5 (O2) – LDX-218
This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:5820452 Design commissioned by: Christopher Clark
Whoop FPV Gimbal
This is a FPV Gimbal designed for whoops/micros and mounts to a standard whoop board (26mm x 26mm). Kits and Pre-Builts available at the Medlin Drone Store! Files on Thingiverse: https://www.thingiverse.com/thing:5733796 Long overdue, I have finally made a tiny whoop gimbal to practice and enjoy flying with a FPV gimbal, via head tracking or other means ofContinue reading “Whoop FPV Gimbal”
FPV Gimbal – Halo Osiris LONGBODY – LDX-218
This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:5650412 Design commissioned by: Andrew Lawrence
FPV Gimbal – iFlight Chimera7 Pro – LDX-218
This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:5593424 Design commissioned by: Anonymous
FPV Gimbal – 30.5 x 30.5 Mounting – LDX-218
This is the base design has a 30.5×30.5 mounting pattern seen on some BQE and Hyperlow frames and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:5539339 Design commissioned by: Richard Howarth
FPV Gimbal – CMW BangGod – LDX-218
This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:5500272 Design commissioned by: Ryan Hall
FPV Gimbal – GEPRC CineLog 35 – LDX-218
This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:5432361 Design commissioned by: Anonymous
FPV Gimbal – Rotor Riot SkyLite – LDX-218
This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:5395923
FPV Gimbal – WoodChuckFPV Wasp 5″ HD – LDX-218
This is the base design is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:5378724
Medlin Drone 