Category Archives: Parametric Design

FPV Gimbal – Holybro Kopis CineWhoop 3″ – LDX-218

This design has two options, one with the servo in horizontal orientation and one that conserves space by putting the servo vertical. Both designs will require the rear to be zip tied down to the top plate as there is no standoffs there to bolt to, this is similar to the Shen Drones Squirt design,Continue reading “FPV Gimbal – Holybro Kopis CineWhoop 3″ – LDX-218”

FPV Gimbal – GEPRC Crocodile7 – LDX-218

This design is for the base of the gimbal and is intended to be used with the Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:5152279 Design commissioned by: Dominic Herrera If the Universal Mount doesn’t work with this base or for your application this design is compatible withContinue reading “FPV Gimbal – GEPRC Crocodile7 – LDX-218”

FPV Gimbal – Universal Camera Mount

This is a FPV gimbal design that accepts any camera via the standard action camera ‘tab’ mount. This is compatible with all existing kits and tutorials and with almost all of the existing Medlin Drone gimbal designs, mounting on the standard Medlin Drone 20mm bearing housing, and will work with analog, DJI, and Shark Byte,Continue reading “FPV Gimbal – Universal Camera Mount”

FPV Gimbal – Rotor Riot CL1 / HD1 / XR – LDX-218

This is the base design and is intended to be used with the 18mm Universal Camera Mount. It will fit both the normal and XR versions, the base is specific to the CL1 and HD1 as they have different bolt patterns. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:5031319

FPV Gimbal – T-Motor FT5 MKII V2 HD – LDX-218

This is a designfor the T-Motor FT5 MKII V2 HD, I have chosen to reverse the drone and use the back as the front in order to not move the DJI Air Unit, but I am including options for both normal and reverse orientation. Guide for 3D printing the gimbal design here. Files on Thingiverse:Continue reading “FPV Gimbal – T-Motor FT5 MKII V2 HD – LDX-218”

FPV Gimbal – Camera Mount Options

Many of the open source gimbal designs share the same 20mm bearing housing, this means that for most designs the only frame-specific part is the base, while the top/camera mount is cross-compatible between all designs that share the 20mm bearing housing. This doesn’t mean that they will all work perfectly on any base/frame, this justContinue reading “FPV Gimbal – Camera Mount Options”

FPV Gimbal – Shen Drones Terraplane – LDX-218

This is a design for the Shen Drones Terraplane. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:4964713 UPDATE: This design is compatible with the 20mm Universal Mount. If the Universal Mount doesn’t work with this base or for your application this design is compatible with the 20mm GoPro/FPV Camera Mount Options:https://www.thingiverse.com/thing:4983596