This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6239468 Design commissioned by: Gabriel Banvillet
Category Archives: Gimbal Design
Sub-250 FPV Tilt Gimbal
Prebuilt Sub-250 Tilt Gimbals available here! This is a tilt gimbal intended for small sub-250-gram drones, it has major limitations but works well enough to use for scenarios where smoothness isn’t critical, and weight is. The FPV camera is completely exposed and the gimbal itself isn’t durable, so this is not intended to withstand crashes.Continue reading “Sub-250 FPV Tilt Gimbal”
FPV Tilt Gimbal – Lumenier QAV Pro Mini Whoop 3.5– LDX-218
This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6151752 Design commissioned by: Calvin Nellas
FPV Tilt Gimbal – HGLRC Rekon7 / Rekon7 Pro– LDX-218
This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6111761 Design commissioned by: Darren Hackney
FPV Tilt Gimbal – Rotor Riot Tanq – LDX-218
This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6075858
FPV Tilt Gimbal – ImpulseRC Apex Evo – LDX-218
This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6070780
FPV Gimbal – ImpulseRC Micro Apex – LDX-218
This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6065815 Design commissioned by: Connor Magness
FPV Gimbal – GEPRC CineLog 35 V2 – LDX-218
This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6065811
FPV Gimbal – iFlight Nazgul5 V3 – LDX-218
This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6065807
FPV Gimbal – FSQ35 / FlightSquare 3.5 – LDX-218
This is the base design and is intended to be used with the 20mm Universal Camera Mount. Guide for 3D printing the gimbal design here. Files on Thingiverse: https://www.thingiverse.com/thing:6002860 Design commissioned by: Jae Hyeok Lee
Medlin Drone 